…….π This little update section is hush hush so shhhhhh…. π As you may of seen or heard I’m fitting a BMW ZF 6 Speed gearbox to the NC to cope with the power I’m hoping to go for. *I’ll …
Tracktuned Articles.
This one hurt my brain researching. πͺ So pressure sensors, which ones, which manufacture, brand?! Few things to explain first; PSIa = Absolute (This is always used for MAP sensors, These sensors show vacuum) PSIg = Vented Gauge ( A …
As you may of seen from my Instagram a while ago I installed a Haltech 1500 Elite. π₯π₯π₯π₯ Why may you ask as the OEM ECU is perfectly capable of being tuned with the likes of ECUTEK? π‘ Well.. apart …
As you may of recalled from one of my previous post regarding the alternator relocation. You can check it out here > https://tracktuned.uk/abs-alternator-relocation/ π I used a Mazda 3 alternator to move the alternator to under the inlet to free …
This was quite a learning for myself and was pure luck I came across the information. I had originally bought a set of ARP 218-4702 which are ARP2000 for my build. As with any build you go ARP for that …
You may of noticed I’ve done a new logo! π I did love the old logo but it wasn’t very sticker friendly and I wanted something fresh and a design I really loved. I’ve gotta say I did go through …
The bottom end is built and ready to rumble but there has been a few slight changes along the way. π What’s happening then? You may of noticed I’ve recently sold my oil cooler setup along with the Moroso coolant …
This is a build you need to follow!!! π As far as NC builds go this one is right up there as one of the best I’ve seen. You can checkout the Facebook page @ https://www.facebook.com/TXTrackNC/ The detail on the …
So after my stupidity of deciding to sell up my old car π€·ββοΈ. The main soul of the car lives on. All the engine / turbo / exhaust / Dash setup etc went to a good friend Jim who was …
Long overdue update but a lot has been happening in the back ground. So.. what’s been going on? Well.. Dan over @ DAN ST Engineering had 5 Duratec 2.5 that he imported over from the USA. I was originally going …